1930's Trade Stimulator

Back Door Casting

Bally Baby and 21 Vendor


This back door fits both the Bally Baby and the 21 Vendor Trade Stimulators. It was recast from a highly polished original, and has exceptional features and details, and an easy fit. The original door is a cast aluminum assembly with two steel pins inserted into the top edge to mate with holes at the top back of the machine. To maintain versatility for your use, we left the pins in and cast it as one piece out of virgin aluminum, with the pins already part of the casting.

It takes about 3 minutes with a flat file to taper the pins to fit your machine. Or if you want the steel pins, just cut these off, drill the pin holes and insert standard steel dowel pins. Quality sand casting just like the original. The lock hole is already there, and if your machine has the optional gumball reset button feature on the back, the original boss is located on the door and only needs drilled open. If your machine is like most, you need to do nothing.

It takes about 5 minutes filing and sanding to prepare it for painting, or you can leave it the natural polished aluminum finish. We only made a few of these.

 
Esnarf Item . #4205 Price . . $37.85

Sorry . . . . . . SOLD OUT

2 Lbs. Mailing weight. We send it Priority Mail, rate depending on Zip Code.

Click Here To See our Catalog

How to Order ~ Click Here